ESAB Rebel EMP 235ic Portable Multi-Process Welder —  120/230 Volts, 250 Amp Output, Model# 0558012702

ESAB Rebel EMP 235ic Portable Multi-Process Welder — 120/230 Volts, 250 Amp Output, Model# 0558012702

$2,399.00
Tax $2,399.00
Brands
Product Code: UNIN-WL7057
Stock In Stock
Viewed 167 times

Product Description

ESAB Rebel EMP 235ic Portable Multi-Process Welder — 120/230 Volts, 250 Amp Output, Model# 0558012702

The lightweight ESAB® Rebel™ EMP 235ic Portable Multi-Process Welder offers 110V/230V flexibility plus some of the most innovative welding technology available. This true multi-process system is designed for MIG, Flux-Cored, Stick and TIG welding. Loaded with features including built-in wire feeder, Hot Start, Arc Force and more. 3-year limited warranty. Package includes MIG gun, electrode holder, Argon flow gauge regulator, ground clamp with leads, plus a variety of other accessories.

Features

  • sMIG Technology featuring exclusive "smart-MIG" feature that continuously learns and adapts to the operator's welding technique to provide a stable arc and superior, repeatable welds
  • MIG, Flux-Cored, TIG and Stick welding applications
  • TRUE multi-process, 120/230 multi-voltage capabilities
  • Runs the full range of 0.035in. (0.9mm) wire, short arc and spray transfer
  • Welds up to 0.045in. (1.2mm) solid wire, up to 0.052in. (1.4mm) cored wire, rods up to 5/32in. (4.0mm) and TIG rods up to 3/16in. (5mm)
  • Delivers up to 250 Amp welding power
  • Weighs just 53 lbs. for unmatched portability
  • Rated output: 235A @40% Duty Cycle (MIG); 210A @ 40% Duty Cycle (STICK); 240A @ 40% Duty Cycle (TIG)
  • LCD color display
  • Weld parameter storage
  • Trigger lock
  • Short arc and Spray transfer capable
  • Built-in wire feeder with 4in., 8in. and 12in. spool capabilities
  • Hot start and Arc Force (Stick mode only)
  • Voltage trim, Inductance, Burn back, Pre-flow/Post-Flow Adjustment Capable (MIG mode only)
  • Lift arc (TIG mode only)
  • Package includes 15ft. 250A MIG gun, 10ft. 200A electrode holder, 10ft. ground clamp with leads, Argon flow gauge regulator with 12.5ft. gas hose, ten 7018 stick electrodes, 70S-6 0.035in. 10-lb MIG wire sample spool, spare nozzle, diffuser, 2 contact tips, drive roll kit, material thickness guide, spare 0.035in. conduit liner, and 120V and 230V plugs

Specification

Item# 111879
Brand ESAB
Manufacturer's Warranty 3 Yr Consumer Limited
Ship Weight 53.0 lbs
Multi-process Yes
Volts 120/230
Amps 250
Mig Ready Yes
Spoolgun Included No
Cart Included No
Duty Cycle MIG: 40% at 120A (120V), 40% at 235A (230V); Stick: 40% at 90A (120V), 25% at 210A (230V); TIG: 40% at 130A (120V), 40% at 240A (230V)
Max. Weld Thickness 1/2 in
Max. Welding Wire Diameter 0.045 in
Min. Output Amps 5
Max. Output Amps 250
Wire Feed Speed Control Yes
Power Cord Length 10 ft
Clamp Cable Length 10 ft
Regulator and Gas Hose Included Yes
Shielding Gas Required Yes
Product Weight 63 lb

Write a review

Note: HTML is not translated!
    Bad           Good
So Extra Slider: Has no item to show!